Solution. #3. PC Optical drives are data only devices. A DVD or Blu-Ray player has the hardware and software to take the raw data and convert it into a video signal the TV can take in. A PC with an optical drive still needs a video player, for example, to even play discs. There are a lot of devices you can get that will add smart features to Using a DVD player with an HDMI connection is a straightforward and easy way to watch your DVDs on a smart TV. Here is a step-by-step guide to help you set it up: Step 1: Check the HDMI Ports. Ensure that your DVD player and smart TV have HDMI ports. These ports are typically labeled “HDMI” and can be found on the back or side panel of both Using your Samsung Smart TV remote, navigate to the input/source selection menu. Select the component input or AV input that corresponds to the ports you connected the DVD player to. You should now see the video and hear the audio from your DVD player on your Samsung Smart TV. Step 1. Connect the video and audio outputs of the DVD player to the video and audio inputs of the television set using the RCA video cables. Most DVD players that are not Blu-ray or HD-DVD players use the red, white and yellow RCA cables, so simply match up the colors of the cable heads to the colored rings of the inputs and outputs. Check Your TV’s Ports. If you want to connect a smart TV with DVD player, the first thing you should do is check out the port selection on your TV. Your TV device will likely have an HDMI port, which is the best-case scenario. HDMI is the current standard when it comes to TVs, and it’s used not just for DVD and BluRay but also for any other Connect your Xfinity TV and DVD or VCR so you can record the channel being watched. Make sure your Xfinity TV and DVD or VCR player are both tuned to channel 2, 3 or 4 (depending on your converter). Connect the wires so the cable signal passes from the main source to the converter box, then to your television. Connect your DVD/VCR using the inputs. How to Play Movies From PC to TV Using WirelessIf you want to view movies or tv shows on your TV from your computer its pretty easy to do. All you need is a Step 2: Connect the three plugs on each end of the composite cable from the matching color jacks on the back of the DVD player to a set of composite in-jacks on the Panasonic. Step 3: Turn on the HDTV, the cable box and DVD player. Step 4: Press the source selection button on the Panasonic remote to watch cable programming or change over to the Go to the Output area on the back of DVD player and insert the cables according to the interface color. 2. And plug the other end of the cable into your corresponding interfaces on the TV. 3. Finally, power on both TV and DVD player and insert a disc to test the connection. Then you start watching your DVDs on TV. Shop Owner. 13,085 satisfied customers. I think I have my phillips dvd player plugged into my Tv. I think I have my phillips dvd player plugged into my Tv. The player lights up and opens and closes with a dvd but nothin happens on the tv … read more. I3NruTo.